Power versus power

Power versus power began for me thirty plus years ago when I began questioning workshop safety. I complied with all regulations yet at the end of the day using power equipment I was coughing up junk like a veteran smoker. Only trouble was I didn't smoke!

How do you think about power woodworking? I mean, what's your first thought? Mine is not like everyone else's. I don't generally think wrestling a 3hp router onto the 1/2" rim of a box to rout a roundover as power woodworking. I think sledge hammer/nut syndrome. But that's the macho man of woodworking image portrayed in magazines. A bit like the old Marlborough ads when men and women rode across the rugged Nevada dessert pursuing their freedom to enhance their lifestyle smoking themselves to death.

We often look at power woodworking as having provided power to our work and eased us from the drudgery, which sometimes it might. But there is a price to pay and we have to face it. Machines are driven by electric power. They actually deliver far more power than we can use effectively and far more power than we actually need too. If you are not particularly strong. I mean muscularly strong, like manly strong, these power machines are in fact highly dangerous. I think that many power tools are too dangerous for most women to use and also many men too and most women, when introduced to power machines like the one shown, feel reticent to try them. Fact is, they are right to feel intimidated. Fact is, their wrists are most often too small and their hands are not big enough either. Their hand, wrist and upper body weight-to-strength ratio is different than a man's too. This can be true of other machines also. Table saws, chop saws and so on. So, it's all a matter of perspective. To a large percentage of women, to all children under 16 at the earliest, to a percentage of men, power tools are not empowering tools but really very dangerous.

On the other hand, a well-sharpened chisel, saw, plane, ax, spokeshave, delivers the exact power the people I just listed need to get the job done efficiently and safely. They are indeed power tools with dynamism. You provide the power, direction according to your will and energy levels. Quite simple really. Further still, what about skill? You are developing a working knowledge of the wood and you are developing real skill.

Now look at this. One moulding plane cuts a foot long mould in 15 seconds. So 10' long stick takes 2 1/2 minutes. The plane is 150 years old. Now that's power!

Pick up a chisel and mallet tomorrow. Who needs moulds (molds UK) on every square edge anyway. All they do is make your work look like the stuff from Ikea anyway. Forget the rugged-individual look. That's all imagery anyway and nothing more. Look beyond the face shields and the dust masks and see the face behind the disguise. They're not woodworkers at all usually.

Now here is my whole and complete mess. Not one fraction of an ounce of dust. I can cycle this through my chicken coup to get nice clean eggs to boot.

Now, you've been working for an hour with your router and turned on the tablesaw a few times too. These two "power tools" charge the air with masses of dust no matter how good your extraction system. What's the very first thing you do when the machining is done? I mean immediately? That's right, you can't wait to get that dust mask off not matter how good it is, or lightweight it is. After all, the machine is stopped and you have had the dust extractor on the whole time and also the shop air filter too; just for good measure. Fact is that the air is still charged with finings that you cannot see and this that you cannot see is the most dangerous of all the dusts. It will commonly stay in the area you are working in for an hour or more. You breath it into your lungs, throat and nasal passages after the mask has been removed. Welcome to freedom as you race the open range with your 20 pack with your friends riding beside you! Think about. More power to you!